Model EX

Model EXModel ex is a self-contained hydraulic control system designed to control hydraulically-actuated reverse acting slab gate valves with a fail-safe mode of operation.

The system is rugged, compact and easy to access in a field service environment. Components are designed to perform well and provide years of trouble free service even in the harshest of operating conditions.

The system energizes the actuator using its own hydraulic fluid reservoir. There is no need for access to a hydraulic power source at the wellsite or wherever the actuated valve is deployed.

Ideally suited for deployment in remote locations or locations with limited power source options.

Technical Data



07 Model  EX

The Omni Model EX is a self-contained hydraulic control system designed to control hydraulically-actuated reverse acting slab gate valves with a fail-safe mode of operation.

System Specifications

Temperature Range (˚F) -20 to 180
Reservoir Capacity (in^3) 120
Maximum Operating Pressure (psi) 3,000 (See Note)
HP Accumulator Capacity (in^3) 20
Pump Displacement (in^3) 0.38

Note: The Model EX comes standard with a machined aluminum block offering a maximum operating pressure of 3,000 psi. If actuator control pressure exceeding 3,000 psi but not to exceed 5,000 psi is required, the Model EX can be supplied with a machined steel manifold block.

Show EX Parts List

Internal Configuration

Actuator depicted with typical 3,000 / 5,000 psi bonnet
Model EX


< Pneumatic & Hydraulic Actuators    /    Expanding & Slab Gate Valves >

model-ex

Please call for quote:
(918) 687-6100